A SERVICE OF

logo

Removal and replacement procedures 32
Table 3 Cable Connections from the System Board
Cable To System board designator
4-pin power connector Power board J54
ODD 1 HDD 1 J23
ODD 2 HDD 2 J20
Hard drives
One server tray can accommodate two 3.5 in. or four 2.5 in. hard drives, and the chassis can
accommodate two server trays for up to four 3.5 in. or eight 2.5 in. hard drives. The server supports
both SAS and SATA hard drives.
Figure 4 Hard Drive Locations
Item Description
1 1
st
SAS/SATA hard drive
2 2
nd
SAS/SATA hard drive
To remove hard drive:
1. Unlock the HDD carrier latches.
2. Rotate the HDD handle up.
3. Push the HDD back and then lift it out of the HDD cage.
4. Rotate the HDD carrier handle down and then lock the HDD carrier latches.