6 Peripheral Administration Remote Terminal Administration
UCS 1000 R4.2 Administration 585-313-507 Issue 3 April 2000 292
8 Do one of the following:
~ If you want a banner page to print, skip the following steps a through c
and continue with step 9.
~ If you do not want a banner page to print, complete the following steps
a through c.
a Enter /usr/lib/lp/model
b Enter cp standard LANHP
c Edit the LANHP file and change nobanner=”no” to nobanner=”yes”.
9 Enter lpstat -t
The output should indicate the lpstat spooler is running and the printer
you added should be displayed.
10 To make this printer the default, enter lpadmin -dhp4si
Remote Terminal Administration
This section describes the procedures to configure and administer a remote
terminal for use with the voice system.
