A SERVICE OF

logo

2. Slide the paper-width guide to its outermost position.
3. Insert the stack of cards into the photo tray with the short edge forward and the print
side down. Slide the stack forward until it stops.
4. Slide the paper-width guide inward until it stops at the edge of the paper.
Do not overload the photo tray; make sure the stack of cards fits within the photo tray
and is no higher than the top of the paper-width guide.
5. Lower the photo tray lid.
Related topics
Change the print settings for the current job” on page 32
Chapter 6
22 Load paper
Load paper