TallyGenicom Intelliprint 8008N Color Laser Printer User Guide
6-28
6.4 Cleaning the printer to ensure
good print quality and reliable
media feed
Note: It is important when following this section to start at the beginning and read
and follow it all the way through. Throughout this section it is recommended for users
to only use a clean dry lint free cotton cloth to clean parts. Ensure that you do not
breathe in toner particles when cleaning and if toner comes into contact with your skin
or clothes clean off using cold water only.
Engineers only may need to use special vacuum cleaners to clean certain parts more
thoroughly. These cleaners have very fine filters which ensures that toner removed from
the printer is not sent back into the air. Also when vacuum cleaners are used to clean
certain parts eg the transfer belt cleaner high static chargers will be generated.
Note: Ensure that the printer is powered off before cleaning.
Print quality check list
Below are pictures which illustrate the items to check in order to maintain and
produce good print quality. Use these together with the information given
above.
If a sheet is printed with colored vertical stripes or color unevenness, clean the
charging unit of the belt cartridge.
Notes on replacing the belt cartridge
z Do not touch the photosensitive belt.
z The photosensitive belt is very sensitive to light. If this belt is exposed to
light of no less than 800 lux for no less than 2 minutes, it deteriorates, caus-
ing troubles in the images printed. Pay attention not to expose the belt car-
tridge to light wherever possible.
