A SERVICE OF

logo

Open as PDF
next previous
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
53
C122-E180-01EN
RMG_0006
Failed to get connect mode. (xxx)
window and try again. If the
problem is not solved,
contact the support center.
RMG_0015
Invalid entry.
Correct the entered value.
RMG_0018
Failed to get registration data. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0029
Invalid length.
Enter a valid length.
RMG_0036
Required entry.
Enter a valid value.
RMG_0065
Failed to get customer information.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0066
Customer Information setting frame display
completed.
None.
RMG_0068
Invalid character specified in [Company
Name].
Confirm the valid characters
and correct the entry.
RMG_0069
Invalid character specified in
[Department/Division].
RMG_0070
Invalid character specified in [Address].
RMG_0071
Invalid character specified in [Building].
RMG_0072
Invalid character specified in [Administrator
Name].
RMG_0073
Invalid character specified in [Machine
Installation Site]
RMG_0074
Invalid character specified in [Machine
Installation Building].
RMG_0075
Characters that cannot be specified are
included in the [Company Name(kana)] of
customer information.
RMG_0076
Characters that cannot be specified are
included in the [Administrator Name(kana)] of
customer information.
RMG_0181
Invalid E-mail address specified.
Enter a valid value.
TABLE 6.16 Message in the [Customer Information Review] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0041
Failed to setting Machine status.(xxx)
RMG_0067
Customer Information frame display
completed.
None.
RMG_0077
Failed to register customer information. (xxx)
Confirm that HOSTNAME is
specified in the MMB
Network Interface setting. If
the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0078
Customer information registration completed.
None.
TABLE 6.17 Message in the [Information Transmit Agreement] window
Message code
Message
Action