CHAPTER 5 CHAPTER 5 REMCS Service Detail Settings
5.2 Detail Environment Settings
42
FIGURE 5.3 [Environment settings] window in case of P-P connection
TABLE 5.3 Items in the [Environment settings] window in case of P-P connection
number of
Enter the timeout trigger for E-Mail (seconds)
in single-byte numeric characters.
Enter the retry count for E-Mail in single-byte
numeric characters.
Enter the retry interval for E-Mail in single-
byte numeric characters.
Enter the name of SMTP/PROXY server or
IP address in single-byte numeric character
Enter the port number of the SMTP server in
single-byte numeric characters.
Initial value: 25 (Well Known Port is used.)
connection
Select type of encrypted connection of SMTP
over SSL from ‘none’ (default), ‘STARTTLS’
Select the priority of IP version from ‘none’,
‘IPv4 (default)’ and ‘IPv6’
Address
Enter the e-mail address of originator in
single-byte numeric characters and
Large data
transmission method
Select dividing method from ‘none’, ‘event
dividing’ (default).
Enter dividing size in single-byte numeric
characters.
- mail
Default: 64 KB
Range: 10 to 100 KB
- event
Default: 512 KB
