A SERVICE OF

logo

Open as PDF
next previous
CHAPTER 6 REMCS Messages
6.1 Messages in REMCS Windows
51
C122-E180-01EN
RMG_0042
Internet(Mail Only) connection environment
setting frame display completed.
None.
RMG_0043
Failed to set REMCS environment (Internet
connection(Mail only)). (xxx)
Confirm the FQDN or IP
address of the specified
SMTP server.
Also check whether the
network status is normal.
RMG_0044
Registration of REMCS environment data
(Internet connection(Mail only)) completed.
None.
RMG_0056
Failed in the connection check notification.
(xxx)
Check whether the network
status is normal.
RMG_0095
Connection type mismatch.
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0181
Invalid E-mail address specified.
Enter a valid value.
RMG_0189
Execute registration of REMCS environment
data.After this operation, all events are not
sent to the REMCS Center until connection
check is completed.
\nAre you sure?
Click the [OK] or [Cancel]
button.
RMG_0207
Invalid value in [Split size].Please specify it
within the range of 10-100.
Enter a valid value.
RMG_0208
Invalid value in [Split size].Please specify it
within the range of 64-512.
TABLE 6.13 Messages in the [Point-to-Point Connection environment settings] window
Message code
Message
Action
RMG_0001
Failed to get Machine status. (xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0002
Failed to make frame screen data. (xxx)
RMG_0004
Invalid CGI parameter specified.
RMG_0006
Failed to get connect mode. (xxx)
RMG_0015
Invalid entry.
Correct the entered value.
RMG_0018
Failed to get registration data.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0028
Input all entries.
Fill in any blank entries.
RMG_0037
Execute registration of REMCS environment
data.
Are you sure?
Click the [OK] or [Cancel]
button.
RMG_0041
Failed to setting Machine status.(xxx)
If the error still occurs when
you retry the operation, exit
and restart the REMCS
window and try again. If the
problem is not solved,
contact the support center.
RMG_0056
Failed in the connection check notification.
(xxx)
Check whether the network
status is normal.
RMG_0079
Point-to-Point Connection environment setting
frame display completed.
None.
RMG_0080
Failed to set REMCS environment(Point-to-
Point).(xxx)
Confirm the FQDN or IP
address of the specified
SMTP server.
Also check whether the
network status is normal.
RMG_0081
Registration of REMCS environment data
(Point-to-Point) completed.
None.