Lists a directory of files on
the diskette and lists the files
in alphabetical order S-CHORD, D
Lists time and date stamp
along with directory S-CHORD, D, W
Logs onto a subdirectory S-CHORD, C
Puts a volume label on a diskette S-CHORD, V
Resumes reading a large file S-CHORD, R
Deletes a file from diskette S-CHORD, K
Formats a diskette, 720 or 1.4M S-CHORD, F
Makes a subdirectory
on the diskette S-CHORD, M
Deletes a subdirectory
on the diskette S-CHORD, X
Block transfer command S-CHORD, Y
Before describing the commands it is important to know a bit
of the philosophy on operating the disk drive. The diskette is
simply a storage device for notetaker files. You can transfer
files from the diskette to a file within notetaker or you can send
a file in notetaker to the diskette and give it a name. You
cannot look at files or change them while they are on the
diskette. You must first read them into the notetaker and then
operate on them.
Loading a File
It is not necessary to make room on your notetaker as current
firmware revisions automatically expand the file size. You
may, however, want to create a new file on the notetaker to
put the information or you may want to read the information
Part # 440057-001 Rev. A 5
