A SERVICE OF

logo

2-72
72 | Handling Paper and Other Media
Printing on Posterboard
You can print on Epson Enhanced Matte Posterboard or other heavy stock
up to 40 × 60 inches. Follow these instructions when you print on
posterboard or other media more than 19 mil (0.5 mm) thick.
1. Make sure no other paper is loaded for printing. You can leave roll paper
on the spindle, but make sure you wind it up fully and close the roll
paper cover.
2. Press l until
appears on the LCD display.
3. Make sure the Paper Check light is on, then release the paper lever. If
the paper lever is locked, press and hold the button for 3 seconds to
print the barcode and unlock the paper lever.
4. Open the front cover. (The cover has a lip that acts as a paper support.)
5. Feed the posterboard into the paper slot until it meets resistance.
Caution: Be careful not
to touch the cables
around the print head;
otherwise, the printer
may be damaged.