A SERVICE OF

logo

Open as PDF
next previous
2-68
68 | Handling Paper and Other Media
3. Remove the paper stop from the movable unit by pinching the knob.
4. Reverse the paper stop so that the smaller knob is on the outside. Then
pinch the knob and reinstall the paper stop on the movable unit.
Using Cut Sheet Paper
You can print on many types of cut sheet paper and other media. The
printer accepts sheets ranging from letter size to 64 inches wide.
You can leave your roll paper on the spindle when you print on cut sheets;
make sure it is removed from the paper path and rolled up.
If you’re using stock thicker than 19 mil (0.5 mm), load it as described on
page 72.
If you’re loading small sheets or fine art paper, see page 71.