C1624M-F (9/07) 137
Figure 159. Scheduling Cameras by Events
e. To add an event to your schedule: in the Events list click the event you want to add, and then click Add. Only configured events appear
in the list. Alarm Devices includes any alarms that have been configured for encoders. Each alarm appears as a separate entry. Event
Groups includes any custom groups that have been created on the Event Groups tab of the Setup screen. Motion Alarms includes any
motion sensing areas that have been configured for cameras.
f. To remove an event from your recording schedule, reverse the process: in the Assigned Events list, click the event you want to remove,
and then click Remove.
g. Select the camera (or cameras) you wish to record when the event occurs. You may select all cameras or select individual cameras by
location or camera group, and then click Add.
h. When you have finished setting the event recording schedule, click OK. To exit the window without saving your changes, click Cancel.
i. To set the length of time that video will be recorded before and after an alarm is triggered, click the arrow beside Event, and then
select Properties from the shortcut menu.
Figure 160. Setting Pre- and Post-Alarm Recording
The Properties dialog box appears.
