xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
2
has two combo 1000 Base-T/SFP ports on the front panel and two 1000 Base-T ports on the back. These gigabit combo ports are
ideal for connecting to a server or network backbone. See the “Ports” section below for differences between the front and rear
Gigabit combo ports.
This Switch enables the network to use some of the most demanding multimedia and imaging applications concurrently with other
user applications without creating bottlenecks. The built-in console interface can be used to configure the Switch's settings for
priority queuing, VLANs, and port trunk groups, port monitoring, and port speed.
Features
• IEEE 802.3ad Link Aggregation Control Protocol support.
• IEEE 802.1x Port-based and MAC-based Access Control
• IEEE 802.1Q VLAN
• IEEE 802.1D Spanning Tree, IEEE 802.1W Rapid Spanning Tree and IEEE 802.1s Multiple Spanning Tree support
• Access Control List (ACL) support
• Single IP Management support
• Access Authentication Control utilizing TACACS, XTACACS and TACACS+
• Dual Image Firmware
• Simple Network Time Protocol support
• MAC Notification support
• System and Port Utilization support
• System Log Support
• Support port-based enable and disable
• Address table: Supports up to 16K MAC addresses per device
• Supports a packet buffer of up to 32M bytes
• Supports Port-based VLAN Groups
• Port Trunking with flexible load distribution and fail-over function
• IGMP Snooping support
• SNMP support
• Secure Sockets Layer (SSL) and Secure Shell (SSH) support
• Port Mirroring support
• WRED support
• Web-based Access Control
• MAC-Based Access Control
• MIB support for:
• RFC1213 MIB II
• RFC1493 Bridge
• RFC2819 RMON
• RFC2665 Ether-like MIB
• RFC2863 Interface MIB
• Private MIB
• RFC4363 for P,Q BRIDGE
• IEEE 802.1x MIB
• RFC1724 RIPv2
• RFC1850 OSPF
• RFC1907 SNMPv2
• RFC2021 RMON2
• RFC2906 IP-FORWARD
• RFC2571 SNMP-FRAMEWORK
• RFC2572 SNMP-MPD
• RFC2573 SNMP-TARGET
• RFC2574 SNMP-USER-BASED-SM
• RFC2575 SNMP-VIEW-BASED-ACM
