DES-3500 Layer 2 Fast Ethernet Switch CLI Reference Manual
100
Example usage:
To display traffic control settings for ports 1-3:
DES-3526:admin#show traffic control port 1-3
Command: show traffic control port 1-3
Traffic Storm Control Trap : None
Port Broadcast/ Multicast/ Unicast/ Time Count
Threshold/Action Threshold/Action Threshold/Action Interval down
(Action Indication D:drop S:shutdown *:port shutdown)
---- ------------------ ------------------ ------------------ -------- -----
1 Disabled/128000/D Disabled/128000/D Disabled/128000/D 5 0
2 Disabled/128000/D Disabled/128000/D Disabled/128000/D 5 0
3 Disabled/128000/D Disabled/128000/D Disabled/128000/D 5 0
DES-3526:admin#
To display traffic control settings for group_list 1-3:
DES-3526:admin#show traffic control group_list 1-3
Command: show traffic control group_list 1-3
Traffic Control
Broadcast Threshold Multicast Threshold Destination Threshold
Unit Group [ports] Storm (pps) Storm (pps) Lookup Fail (pps)
---- ------------- --------- --------- --------- --------- ----------- ---------
1 1 [ 1 - 8 ] Disabled 128000 Disabled 128000 Disabled 128000
2 2 [ 9 - 16] Disabled 128000 Disabled 128000 Disabled 128000
3 3 [17 - 24] Disabled 128000 Disabled 128000 Disabled 128000
DES-3526:admin#
show traffic control
Purpose Used to display current traffic control settings.
Syntax
show traffic control {[group_list <storm_grouplist> | port
<portlist>]}
Description This command displays the current storm traffic control configuration on
the Switch.
Parameters
group_list <storm_grouplist> - Entering this parameter will display the
traffic control settings by group list as defined below.
Group 1 – Inclusive for ports 1-8.
Group 2 - Inclusive for ports 9-16.
Group 3 - Inclusive for ports 17-24.
Group 4 - Inclusive for ports 9-16 (DES-3550). Inclusive for Gigabit
port 25 (DES-3526).
Group 5 - Inclusive for ports 33-40 (DES-3550). Inclusive for Gigabit
port 26 (DES-3526).
Group 6 - Inclusive for ports 41-48 (DES-3550 only).
Group 7 - Inclusive for Gigabit port 49 (DES-3550 only).
Group 8 - Inclusive for Gigabit port 50 (DES-3550 only).
port <portlist> - Used to specify port or list of ports for which to display
traffic control settings. The beginning and end of the port list range are
separated by a dash.
Restrictions None.
