110
E
Using a Memory Card
CARD PHOTO REVIEW
+
1. During/after recoding a still image, press the CARD
-
button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a stilll image, the menu appears
immediately.
• PROTECT , IMAGE ERASE settings appear.
• If you select |RETURN, the still image disappears.
2. Select PROTECT and press the selector dial in.
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select |RETURN, the still image disappears.
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the selector dial in.
• The image is erased.
To erase an image
To protect an image
● Erasing Still Images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to
erase an image.
• Erase images with caution. Once an image has been erased it cannot be
restored.
There are 3 ways to erase a single image.
To erase images one at a time
1. + ➡ CARD PHOTO REVIEW menu ( 110)
2. + ➡ File Operation menu ( 111)
To erase images one at a time or erase all images on the memory card at once
3. + ➡ Card Operations submenu ( 115)
: When playing back an image in CARD PLAY (VCR) mode
: When displaying an index screen in CARD PLAY (VCR) mode
INDEX
SINGLE
SINGLE
PLAY
(VCR)
CARD
SINGLE
PLAY
(VCR)
CARD
CAMERA
CARD
5_OPTURA100 MC_E(99-125) 7/24/01 13:41 Page 110
