On-screen Manual
>
Scanning Guide
>
Scanning Using the Scanner Buttons
> Scanning and Attaching Documents to E-
mail (E-MAIL Button)
Scanning and Attaching Documents to E-mail (E-MAIL Button)
ttach image files to new e-mail.
Important
MP Navigator EX is compatible with the following e-mail software programs:
- Windows Mail (Windows Vista)
- Outlook Express (Windows XP/Windows 2000)
- Microsoft Outlook
(If an e-mail software program does not operate properly, check that the program's MAPI is enabled.
To enable MAPI, refer to the manual of the e-mail software program.)
Note
If an e-mail software program is not selected, manually attach the scanned and saved image to e-
mail.
Refer to the corresponding manual for the printer, application and e-mail program settings.
1.
Place the document on the Platen.
Important
Place the document face-down on the Platen and align an upper corner of the document with
the corner at the arrow of the Platen.
2.
Press the E-MAIL button.
MP Navigator EX screen appears automatically and scanning starts.
When scanning is completed, the Scan Complete dialog box opens. Select Scan or Exit. Select
Scan to scan the next document, or select Exit to end.
The scanned image is attached to new e-mail.
3.
Specify the recipient, enter the subject and message, then send e-mail.
For details, refer to the manual of the e-mail software program.
Page top
Page 252 of 308 pagesScanning and Attaching Documents to E-mail (E-MAIL Button)
