DR-3010C
DR-3010C
49
This section describes the procedure for adjusting the contours of the scanned
image.
1
Click the [Image processing] tab in the Properties for Canon DR-3010C
dialog box → adjust the Edge emphasis slider to adjust the contours of the
scanned image → click [OK].
NOTE
Move the slider toward <Soft> to soften the image contours, or toward <Sharp> to
sharpen the image contours.
This section describes the procedure for rotating the orientation of the scanned
image.
1
Click the [Image processing] tab in the Properties for Canon DR-3010C
dialog box → select the angle to rotate the image from the Document
Orientation drop-down list → click [OK].
NOTE
The scanned image will be rotated as follows, according to the orientation of the
placed document and the specified angle.
Image Contour Adjustment Image Rotation
270 degrees
Document:
face down
Document Orientation
(clockwise)
Scanned Image
0 degrees 90 degrees 180 degrees
