Playing Back Video
89
During playback pause:
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so
may result in permanent data loss.
- Do not open the double memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder’s operating mode.
• You may not be able to play back with this camcorder movies recorded using another device.
NOTES
• Fast/slow playback modes are not available for scenes converted to standard definition. Scenes in
the [z SD Movies] index screen can only be played back at normal speed.
• You can turn off the recording date and time display or change the information displayed with the
s > [Data Code] setting.
• Depending on the recording conditions, you may notice brief stops in video or sound playback
between scenes.
• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) in
the playback picture.
• The speed indicated on the screen is approximate.
• Slow reverse playback will look the same as continuous frame reverse.
!Resume playback.
"Slow playback* backward/forward.
#Capture the displayed frame as a photo (A 98).
$Decoration (A 103).
* Touch several times to increase the playback speed 1/8 → 1/4 the normal speed. During
slow playback, touch anywhere on the screen to return to playback pause.
