Assignable Buttons
85
Assignable Buttons
The camcorder conveniently features 2 buttons to which you can assign various functions. By
assigning often used functions, you can quickly access them with a single press of a button.
Changing the Assigned Function
1 Open the selection screen for the desired assignable button.
[FUNC.] > [MENU] > q > [Assign Button 1] or [Assign Button 2]
2 Select the desired option and then touch [X].
Options
(
Default value for assignable button 1,
default value for assignable button 2)
Using an Assignable Button
After you assign a function to one of the buttons, press the button to activate the function.
NOTES
• Even if an assignable button was set to one of the following functions in or mode, the
button will be disabled if you set the camcorder to mode: [È Powered IS], [° BLC Always
On], [~ Face Only AF], [Ä WB Priority] or [ AF/MF].
Operating modes:
[È Powered IS] Turns Powered IS on/off (A 55).
[° BLC Always On] Turns backlight correction on/off (A 61).
[~ Face Only AF] Turns face only autofocus on/off (A 50).
[é Story Creator] Activates Story Creator mode (A 99).
[¦ Video Snapshot] Turns video snapshot on/off (A 80).
[Ä WB Priority] Turns white balance priority on/off (A 148).
[ AF/MF]
Switches between autofocus and manual focus (A 47). This option is available only
for assignable button 1.
[z Pre REC]
Turns pre-recording on/off (A 81). This option is available only for assignable
button 2.
[j Off] Does not assign a function to the assignable button.
