Document No. 10-300090, Issue 1 12-7
IP-RIP
ip rip receive version
Command Mode Interface Configuration.
Description Specifies a RIP version to receive on an interface basis. Use the no form of
this command to restore the default setting of RIP Version 1.
Syntax
Sample Output The following example specifies that the interface labeled “boston” receive
RIP version 2 packets.
(config-if:boston)# ip rip receive version 2
Systems P550R, P580, P880, and P882.
To Configure: ip rip receive version [1] [2]
To Restore Default: no ip rip receive version
Table 12-5. Parameters, Keywords, Arguments
Name Definition
[1] [2] The version of the RIP packets received on an interface.
• 1 - accept RIP Version 1 packets.
• 2 - accept RIP Version 2 packets.
