A SERVICE OF

logo

Chapter 2. Hardware Setup
13
Rack Mounting – Front
1. Remove the two screws that secure the detachable front panel to the
chassis. (See Step 1 under Rack Mounting – Split, page 11.)
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the sides at the front of the
unit.
3. Place the KVM switch in the rack. Position it so that the holes in the
mounting brackets line up with those in the rack. Secure the mounting
brackets to the front of the rack.
Phillips head hex
M3 x 8