Chapter 1. Introduction
7
(Continued from previous page.)
No. Component Description
4 Reset Button Pressing in this button performs a system reset. When the
system is reset, the KM0832 beeps, and then the KVM port
LEDs flash in succession until the reset is completed. After
the reset is completed you can login again.
Note: This button is semi-recessed and must be pushed with
a thin object — such as the end of a paper clip or a ballpoint
pen.
5User Port 1
Switch
This switch selects which USER PORT 1 is active-the one
on the front panel or the rear panel. Set it to FRONT to
activate USER PORT 1 on the front panel; set it to REAR to
activate USER PORT 1 on the rear panel.
6 USER PORT 1
(Maintenance
Port)
This user port is provided for convenient and easy access for
system maintenance. It shares the same function with USER
PORT 1 on the rear panel. By switching the USER PORT 1
switch to FRONT, USER PORT 1 on the rear panel is
deactivated and USER PORT 1 on the front panel is
activated. Use it just as you would any other user port. (You
must return the USER PORT 1 switch to the REAR position
to reactivate USER PORT 1 on the rear panel.)
