KL9108 / KL9116 User Manual
68
Hotkey Operation
Hotkeys allow you to provide KVM focus to a port directly from the keyboard.
The KL9108 / KL9116 provides the following hotkey features:
Auto Scanning
Skip Mode Switching
The hotkeys are: A and P for Auto Scanning; and the Arrow Keys for Skip
Mode.
Note: 1. In order for hotkey operations to take place, the OSD Toolbar must be
visible (see Port Operation, page 66). To use the keys designated as
hotkeys (i.e. A, P, etc.) for normal, non-hotkey purposes, you must
first close the toolbar.
2. For issues affecting multiple user operation in Auto Scan Mode, see
Multiuser Operation, page 72.
Auto Scanning
The Auto Scan function automatically switches among all the ports that are
accessible to the currently logged on User at regular intervals, so that the user
can monitor their activity automatically. (See Scan Select, page 85, for
information regarding accessible ports.)
Setting the Scan Interval
The amount of time Auto Scan dwells on each port is set with the Scan
Duration setting (see page 85).
Invoking Auto Scan
To start Auto Scanning, tap the A key. The Auto Scan function cycles through
the ports in order - starting from the first port on the installation. An S appears
in front of the Port ID Display to indicate that the port is being accessed under
Auto Scan Mode.
Pausing Auto Scan
While you are in Auto Scan Mode, you can pause the scanning in order to keep
the focus on a particular computer by pressing P. During the time that Auto
Scanning is paused, the S in front of the Port ID blinks On and Off.
