IPF-2000 User Manual
16
6.2. Protocol
Protocol
Field Description
protocol
IPF-2000 supports H.323，SIP，MGCP protocols.
Select a protocol from the drop down list used by the phone:
z H.323: Select this option to set the phone use H.323 protocol
z SIP: Select this option to set the phone use SIP protocol
z MGCP: Select this option to set the phone use MGCP protocol
use service
Enable/Disable service by checking/unchecking this box. Different service responses different
protocol as follows:
z With SIP protocol used, the protocol service refers to SIP Proxy Server. Check this box
according to system and then fill service address field with SIP proxy Server IP address
of domain name.
z With H.323 protocol used, the protocol service refers to the gatekeeper searching the
address.
To allow the IPF-2000 call each other by E.164 number: Please check this option
and then fill the IP address or domain name of corresponding gatekeeper into the
Service Address field.
To make point to point calls to another voice gateway: Please do not check this
option and fill up the voice gateway’s IP address in the Service Addr. field.
To make calls by dialing IP address of other IPF-2000 or H.323 device (such as
Netmeeting) at the same network segment, do not check this option and leave the
Service Addr. field blank.
※ If gatekeeper is not to be used, please configure the service port as 1720. Detailed
information please refers to the Service Port configuration.
z With MGCP protocol used, the protocol service refers to Call Agent. Please check this
box according to system, and then fill service address field with Call Agent IP address
or domain name.
service type
The default service type is common. For other requests, please find the service type in the
drop down list.
service addr Fill up the IP address or domain name of server corresponding to the protocol been used.
