IPF-2000 User Manual
11
• Press “0” to input your own telephone number for E.164 to register with the server and then press
ENTER.
• Press “1” and then ENTER. Proceed to step 7 and 8.
7. Configure IPF-2000 server account number
On prompt of [Protocol Settings] press ENTER 9 times→ [account] → press SPD/HOLD→ input server
account number (XXX) and then press ENTER.
8. Configure IPF-2000 server account password
On prompt of [Protocol Settings] press ENTER 10 times→ [pin] → press SPD/HOLD→ Enter Server
Password and then press ENTER.
9. Configure IPF-2000 Registration Port
On prompt of [Protocol Setting] press ENTER 11 times→ [register port] → Press SPD/HOLD→ Enter the
required PORT number for registration (XXXX) and then press ENTER.
5.3. Audio Settings
1. Press1234#( Hold the “#” key)→ [Password]→ Press 1234 and then press ENTER→ Network Settings
Press1234#( Hold the “#” key)→Press Vol.+(volume increasing button) 3 times→ [Audio Settings]
2. Configure IPF-2000 voice compression Codec Type :
In [Audio Settings] press ENTER once→ [audio type] → press SPD/HOLD→
z Press “0” and then ENTER to set the Codec to G.729
z Press “1” and then ENTER to set the Codec to G.7231
z Press “2” and then ENTER to set the Codec to G.711u
z Press “3” and then ENTER to set the Codec to G.711a1
z Press “4” and then ENTER to set to auto
3. Set IPF-2000 handset and speaker phone volumes
In [audio setting] press ENTER 6 times→ [handset in] press SPD/HOLD→ Input the volume level of the
handset and the speaker phone (the default setting is 7 and 15 is the highest value) and then press ENTER.
5.4. Other Settings
1. Press1234#( Hold the “#” key)→ [Password]→ Press 1234 and then press ENTER→ Network Settings
Press1234#( Hold the “#” key)→Press Vol.-(volume increasing button) 3 times→ [other settings]
2. Change User Password
In [other settings] press ENTER once→ [password] → press SPD/HOLD→ enter the new password and then
press ENTER.
3. Change Administrator Password
In [other settings] press ENTER twice→ [super password] → Press SPD/HOLD→ enter the new password
and then press ENTER.
