4-16 CHAPTER 4: CONFIGURATION FOR AN APPLE MACINTOSH COMPUTER
Set Up Using FreePPP with Open Transport
FreePPP is a freeware application for accessing the Internet
available for use with Apple’s Open Transport networking
software (version 1.1 or higher) or MacTCP, Apple’s older
networking software. These instructions cover Open
Transport configuration only, and assume that the pertinent
software has already been installed on your system.
These instructions are for FreePPP 2.5v2.
1 Open FreePPP Setup from the menu bar control panel
located along the top of your Macintosh screen (you must
have the FreePPP Setup control panel installed in your
Control Panels folder to access and make changes to
FreePPP.)
The FreePPP Setup screen opens as shown in Figure 4-16.
Figure 4-16 FreePPP Setup Screen
NOTE: If you do not see the General, Accounts or Locations
tabs as shown in Figure 4-16, click the diamond on the left
hand side of the FreePPP setup screen to the down position.
2 Click on the Accounts tab and select New.
