B-6 APPENDIX B: AT COMMANDS, S REGISTERS, AND RESULT CODES
S63
*
Voice Call Routing
0 — Calls to either analog port are blocked
1 — Phone #1 to Phone port 1 only; Phone #2 calls blocked
2 — Phone #1 to Phone port 2 only; Phone #2 calls blocked
3 — Phone #1 to Phone port 1 or 2; Phone #2 calls blocked
4 — Phone #1 calls blocked; Phone #2 to Phone port 1 only
5 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 1 only
6 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 1 only
7 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 1 only
8 — Phone #1 calls blocked; Phone #2 to Phone port 2 only
9 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 2 only
(default)
10 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 2 only
11 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 2 only
12 — Phone #1 calls blocked; Phone #2 to Phone port 1 or 2
13 — Phone #1 to Phone port 1 only; Phone #2 to Phone port 1 or 2
14 — Phone #1 to Phone port 2 only; Phone #2 to Phone port 1 or 2
15 — Phone #1 to Phone port 1 or 2; Phone #2 to Phone port 1 or 2
S65 ISDN Call Logging for Voice Calls for Phone Port 1:
Displays the phone number of an incoming voice call over phone port 1.
This field is read-only. To use this feature, you must have Caller ID enabled
on your ISDN line.
S66 ISDN Call Logging for Voice Calls for Phone Port 2:
Displays the phone number of an incoming voice call over phone port 2.
This field is read-only. To use this feature, you must have Caller ID enabled
on your ISDN line.
S67* ISDN Call Logging for Data Calls:
Displays the phone number of an incoming data call. This field is read-only.
To use this feature, you must have Caller ID enabled on your ISDN line.
Table B-2 S Registers (continued)
Registers
Descriptions
