3-4 CHAPTER 3: CONFIGURATION FOR AN IBM-COMPATIBLE PC RUNNING WINDOWS
1 Double-click the 3ComImpact IQ icon shown in Figure 3-4.
Figure 3-4 3ComImpact IQ Globe Icon
You will see a start message, as shown in Figure 3-5.
Figure 3-5 SPID Wizard Start Message for PC
If you do not want to run the SPID Wizard, click Cancel to
configure your values manually via the configuration dialog
box (see Figure 3-9). Here you can select your ISDN switch
type, enter the telephone number(s) and, if required, enter the
corresponding SPID(s) for your ISDN line. Note that running
the SPID Wizard is the recommended method for configuring
your SPID values.
The SPID Wizard first checks for ISDN layer 1status, and then
configures the switch type.
