Yamaha 5TE-F8197-10 Model Vehicle User Manual


 
7 - 29
DRIV
REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
3.Apply:
Sealant (Quick Gasket
®
)
(to the mating surfaces of the swingarm and
the final drive gear case)
Sealant (Quick gasket
®
):
P/N. ACC-11001-05-01
Yamaha bond No.1215:
P/N. 90890-85505
4.Install:
Final drive gear
Nuts
Bolts
LT
T
R
.
.
63 Nm (6.3 m kg, 45 ft lb)
LT
T
R
.
.
63 Nm (6.3 m kg, 45 ft lb)
5.Install:
Dust cover
Rear axle
*****************************************************
Installation steps:
Install the dust cover 1 onto the rear axle.
N
OTE:
Adjust the length a to 210.1 mm (8.3 in) when
installing the dust cover.
Install the rear axle (with dust cover) 2.
Install the rear brake drum and rear wheel
hub (left).
Temporarily tighten the left axle nut 3.
N
OTE:
After tightening the rear axle nut 3, the
position of the dust cover 1 will slightly move
to protect the oil seal of the final gear case.
*****************************************************