Yamaha 5TE-F8197-10 Model Vehicle User Manual


 
7 - 25
DRIV
REAR AXLE/FINAL DRIVE GEAR AND DRIVE SHAFT
CHECKING THE DRIVE SHAFT
1.Check:
Drive shaft (splines)
Wear/damage Replace.
CHECKING THE FINAL DRIVE GEAR
1.Check:
Final gear case 1
Bearing housing (ring gear) 2
Cracks/damage Replace.
N
OTE:
When the final gear case and/or the ring gear
bearing housing are replaced, be sure to
adjust the shim of the final drive pinion gear
and/or ring gear.
2.Check:
Gear teeth
Pitting/galling/wear Replace the drive
pinion gear and ring gear as a set.
Oil seals
O-rings
Damage Replace.
3.Check:
Bearings
Damage Replace.
N
OTE:
Reusing roller bearings is acceptable, but
Yamaha recommends installing new ones.
Do not reuse oil seals.
When the final drive pinion gear and/or ring
gear are replaced, be sure to adjust the shim
of the final drive pinion gear and/or ring gear.