Filter
Top Products
3 - 59
CHK
ADJ
CHECKING THE BATTERY/
CHECKING THE FUSES
5.Check:
●
Battery terminals
Dirty → Clean with a wire brush.
N
OTE:
After cleaning the terminals, apply a light coat
of grease.
6.Install:
●
Battery
7.Connect:
●
Battery leads
CAUTION:
First, connect the positive lead
1
, then
connect the negative lead
2
.
8.Install:
●
Battery lead cover
●
Battery holding bracket
●
Seat
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.
CHECKING THE FUSES
CAUTION:
Always turn off the main switch when
checking or replacing a fuse. Otherwise, a
short circuit may occur.
1.Remove:
●
Seat
Refer to “SEAT, CARRIERS, FENDERS
AND FUEL TANK”.
2.Check:
●
Fuses
*****************************************************
Checking steps:
●
Connect the pocket tester to the fuse and
check it for continuity.