Filter
Top Products
Overview of How Mobile Devices Work with Wi-Fi and
Direct Mode
The Eye-Fi card deploys a Wi-Fi
network (Direct Mode)
Mobile device connects to the
Eye-Fi card’s Wi-Fi network
The files are copied into the
mobile app on your device
Not foundFound
Download and install the mobile
application to your device from the
application store
Input your Eye-Fi account login
credentials to connect to your Eye-Fi
account on the servers
Scan an item
Image is saved to the
Eye-Fi card. The card then
looks for a configured
wireless network.
Tap your Eye-Fi Card in the Pairing
screen
Using Xerox DocToMe?
Tap Pair With This Card
Using the Eye-Fi mobile app?
Tap Photos and RAW photos
Tap Switch to [your device]
Eye-Fi Helper relays this information
from the server to the Eye-Fi Center
application and then the computer is
no longer the destination for files
Eye-Fi mobile app is available
for both Android and iOS
Xerox DocToMe™ is available for
iOS only at this time
(we recommend you use this
application if it is available for your
device)
This is an overview only. Detailed setup instructions, including setting up Direct Mode, are in the wireless scanning chapter of the
scanner’s user guide.
Insert the Eye-Fi card in the scanner
and turn on the power.
Photos and RAW files
are automatically set
to be sent to the
mobile device when
you pair to the card
If you are using Xerox DocToMe™ , and this is the
first time you are connecting to the Eye-Fi card’s
Direct Mode network, you will need to select the
Eye-Fi network in the Wi-Fi Settings for your
mobile device first. Please refer to the scanner’s
user guide for instructions on setting up Direct
Mode for first time use.
Note
The Eye-Fi servers transfer the
files into the mobile app on
your device
Wi-Fi network is found and the
files are copied to the Eye-Fi
servers