Filter
Top Products
17
TROUBLESHOOTING CAMERA PAIRING
Consult the following table for camera pairing troubleshooting suggestions:
the camera’s signal status icon shows no bars
• making sure the camera is plugged in and the
blue LED is on.
• making sure that both the camera’s and the
monitor’s antennas are extended.
• making sure the camera is paired to the correct
channel.
• re-pairing the camera and monitor.
the camera’s signal status icon shows one or
two bars or the video quality is poor
See “General Guidelines” on page 8 for tips on
improving video quality.
the camera won’t pair with the monitor
• making sure the camera is plugged in and the
blue LED is on.
• pressing and releasing the pairing button quickly.
Do not press and hold the pairing button.