Toshiba 40L1400UC Model Vehicle User Manual


 
88
Setting up your TV
Using HDMI® CEC
v MUTE button turns off the sound.
To use this function:
v Set Initial Speaker Setting to Receiver in the HDMI CEC
Control Setup menu.
v Conrm that a connected HDMI
®
CEC device (such as DVD
player, etc.) is selected for the Audio Receiver input source.
vThese functions depend on the device connected.
vInitial Speaker Setting will be grayed out if Amplifier Control
is set to Off.
Other HDMI
®
CEC functions
When the Enable HDMI CEC Control and each item in the
HDMI CEC Control Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Power If an HDMI
®
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the
HDMI
®
CEC devices connected to the TV.
Amplifier Control If Amplifier Control is set to On, you can adjust the sound volume or turn
off the sound using the remote control.
Initial Speaker Setting From this item, you can set your audio output preference to the TV
speakers or the audio receiver speakers. When this item is set to
Receiver, the TV remote can be used to adjust or mute the volume of the
audio. This item will be grayed out when Amplifier Control is set to Off.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up HDMI
®
CEC
To set the HDMI
®
CEC Setup:
1 From the Options menu, highlight HDMI CEC Control
Setup and press the ENTER button.