Toshiba 40L1400UC Model Vehicle User Manual


 
22
Introduction
TV back panel connections
(Sample Illustration) 40/50L1400UC - Back panel connections
1 ANT/CABLE—Antenna input that supports analog (NTSC)
and digital (ATSC) off-air antenna signals and analog and
digital cable TV (QAM) signals.
2 ColorStream
TM
HD—High-resolution component video input
and shared composite video input, see “Connecting a Blu-
rayTM / DVD player, satellite receiver with ColorStreamTM or
VCR” on page 28
3 HDMI
®
IN—High-Denition Multimedia Interface input
receives digital audio and uncompressed digital video from an
HDMI
®
device or uncompressed digital video from a DVI
device. HDMI
®
connection is necessary to receive 1080p
signals.
4 Digital Audio out— Optical audio output of Dolby
®
Digital or
PCM (pulse-code modulation) format for connecting an
external Dolby
®
Digital decoder, amplier, or home theater
system with optical audio input.
5 Power Cord— Plug one end of the power cord into the jack on
the back of the unit, and the other end into a live electrical
outlet. (Only for 40/50L1400UC models.)
The included power cord is for use with this unit only. Do not use it with other
equipment.
If you are not going to use the unit for an extended period of time, disconnect
the power cord from the wall outlet. Whenever the power cord is plugged into
the wall outlet, it will draw some power, even when the unit is off.
5
Power cord
1 2 3
4
5
Power cord
40”
50”
Blu-ray
TM
/ DVD player, satellite receiver with ColorStream
TM
or VCR”