Filter
Top Products
55
Setting up your TV
Tuning channels using the Channel Browser
5 To save the new input labels, highlight Done, and then press
the ENTER button.
To revert to the factory default labels, highlight Reset and press
the ENTER button.
Input labeling example:
The screen below left shows the default Input Selection screen
(with none of the inputs labeled as a specic device). The screen
below (right) is an example of how you can label the inputs if you
connected a VCR to ColorStream
TM
HD, a video recorder to
HDMI 1, and a DVD player to HDMI 2.
VCR
Recorder
DVD
No inputs labeled
All inputs labeled
(
Sample Image)
Input selection screens
To clear the input labels:
1 In Options menu, highlight Input Options and then press the
ENTER button.
2 Highlight Input Labeling, and then press the ENTER button.
3 Highlight Reset, and then press the ENTER button.
Tuning channels using the Channel Browser
The Channel Browser provides an easy navigation interface for all
your channels and inputs. This feature allows you to:
v Navigate and select entries.
v Keep a list of your favorite channels, see “Favorites browser”
on page 56.
v Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser History List.
v Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser) or Select mode (to surf
over channels in the Channel Browser before you select one to
tune).
v Quickly change inputs from the Inputs List.
v Quickly select HDMI
®
CEC devices from the
HDMI
®
CEC List.