Filter
Top Products
73
Setting up your TV
Adjusting the audio
v You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
v If the sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if
available), highlight the Primary Audio Language eld in step 2
above, and then select the language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 2 above.
v A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast
another language as a second audio program. If you have SAP
on, you will see the current program on the screen but hear the
other language instead of the program’s normal audio.
v If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal audio
will be output. However, occasionally there is no sound at all in
SAP mode. If this happens, set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble and
balance.
To adjust the audio quality:
1 Press the MENU button and open the Sound menu.
2 Press the ▲/▼(arrow) buttons to highlight the item you wish to
adjust (Bass, Treble, or Balance), and then press the ENTER
button.
3 Press the ◄/►(arrow) buttons to adjust the level.
v ◄ makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
v ► makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).