Filter
Top Products
10 ► EP30200 / EP30250 User Manual
1. Check that all parts were received.
EP300 Unit Delivered with:
Gun S15, incl 2,7 m SAFE 91015
Ground device 2,7 m SAFE 8089
1 - Power cord
2 - Power cable 3 m
The S300 requires a welding machine capable to deliver
250-300 Amp, open circuit voltage of max. 80V.
(Not supplied by Stanley)
2. Connect
Connect power cords to mains and power
cables to an welding machine.
(Welding machine not supplied by Stanley).
Make sure positive and negative is correct.
Set welding current on welding
machine to 250 Amp.
(Max 280 Amp)
Open circuit voltage of max. 80V.
Connect brazing gun, power cable and
control cable, to units gun outlets.
Connect ground magnet to ground outlet.
CAUTION
EP30250 OPERATION