Filter
Top Products
3 / Making Calls
27
Protegé
®
Keyset User Guide - without display
Placing a Callback to a Busy
Or Unattended Extension
To activate
1. Dial the extension number.
2. Receive busy tone.
- or -
Receive no answer.
3. Dial 5.
4. Receive confirmation tone.
To delete individual callback
1. Press the Function key and then dial [ # 5.
2. Dial the extension number.
3. Receive confirmation tone.
To delete all callbacks
1. Press the Function key and then dial [ # 5 [.
2. Receive confirmation tone.
7. Callback
When you place an intercom call to a busy or unattended extension, you can
request a callback and hang up. You then receive a callback when the busy
extension becomes available, or when the unattended extension is next used
(goes off-hook and back on-hook).
You may also request a callback on a busy trunk or trunk route. Again, you
receive a callback when the trunk or trunk route becomes available.
The callback signal is two double rings.
Several parties may activate the callback feature on the same extension, trunk
or trunk route. Callers receive callbacks in the order in which they requested
them.
FUNCTION
FUNCTION
[[ [[
# 5
5
x x x
[[
# 5
x x x