Filter
Top Products
SonicWALL TZ 170 Quick Start Guide Page 3
Setting Up Your SonicWALL
Applying Power to the SonicWALL
Attach the power supply to the power cord. Plug the power adapter into the SonicWALL and plug
the other end into a power outlet.
The Power light turns green when power is applied to the SonicWALL. Also, the Test light remains
lit for approximately 90 seconds while the SonicWALL performs a series of diagnostic tests.
Connecting the SonicWALL to the Network
Connect one end of an Ethernet cable to your DSL modem, cable modem, or Internet router.
Connect the other end of the Ethernet cable to the WAN port of the SonicWALL. The link LED
lights indicating an active connection. .
Connect one end of an Ethernet cable to the Ethernet port of your computer.
Connect the other end of the cable to LAN 1 port of your SonicWALL. The link LED lights
indicating an active connection.
1
2
3
Setup Continues
QSG_TZ170_draftG.fm Page 3 Thursday, October 16, 2003 12:36 PM