Filter
Top Products
7
Operating the Door Latch
Step 1.
Use your thumb or forefinger to pull back on the Thumb Lock. This action will
release the locking pin below the metal saddle that joins the door and the
gate frame.
Step 2.
With the Thumb Lock pulled back, lift up on the entire door panel, raising the
gate high enough for the upper and lower metal saddles to clear free of their
counterparts. Your gate door should now be free to fully open. To close the
gate, simply repeat these steps in reverse.
HINT:
If your latch is not properly engaging, ensure that your gate is
level, mounted properly, and that you have not over-tightened
the Threaded Spindle Rods.