Filter
Top Products
4
Step 4.
When you are satisfied with the general placement of your gate, fully tighten
the Threaded Spindle Rods attached to the lower corners of the gate by
further rotating the Adjustment Wheels.
Continue by tightening the upper Threaded Spindle Rods. As you tighten the
upper Threaded Spindle Rods, you will notice the gap between the Door
Frame and the door begin to narrow.
In order for the gate to function properly, tighten the upper Threaded
Spindle Rods completely without removing the Plastic Lock Spacer. Then,
pull the Thumb Lock back to remove the Plastic Lock Spacer. This will ensure
proper spacing between the door and frame.
Diagram D
NOTE:
There should be equal spacing among each of the 4 Threaded
Spindle Rods. Make the appropriate adjustment to ensure you
have installed your gate safely.
Door
Frame
Plastic Door Spacer