Filter
Top Products
Parts List Warnings
Assembly
Care & Maintenance
Replaceable Parts
Warranty
To Use
Contents
Assembly To Use
TM
Install Infant Car Seat
TM TM TM
TM TM TM
TM TM
7 Attach Seat Facing
Handlebar or
Forward
Slide both sides of the
seat into the frame until
you hear each side click
and the RED INDICATOR
IS NOT VISIBLE on the
seat release buttons
(Figure 7).
4
7b
Seat Facing
Handlebar
The seat can be adjusted
to two positions; a sitting
position and a semi-reclining
position. Stand at the side
of or behind the stroller.
Push the buttons on both
sides downward and tilt
the seat to the desired
position (Figure 7a).
NOTES: The seat can be positioned facing the handlebar or forward.
The Buzz
TM
stroller seat is suitable for children from 6 months to age
4 (maximum 50-LBS. / 22.73-kg).
Red
Indicator
7
7a
Seat Facing
Forward
The seat can be adjusted
to two positions when
facing forward; a sitting
position and a semi-
reclining position. Push
the buttons on both sides
downward and tilt the seat
to the desired position
(Figure 7b).
8 To Remove Seat
Push the buttons on both
sides downward and lift
the seat from the frame
(Figure 8).
9 Canopy
Clip each side of the
canopy onto the frame until
it clicks into place (Figure
9). NOTE: Height of canopy
may be adjusted by sliding
it up and down the frame
(Figure 9). The sunshade
may be pulled forward.
8
9
WARNING
DO NOT use when red
indicator is visible (Figure 7). DO NOT use with seat
in the position labeled “WRONG”.
RECLINED
SEMI-RECLINED WRONG
RECLINED
SEMI-RECLINED WRONG