Filter
Top Products
Parts List Warnings
Assembly
Care & Maintenance
Replaceable Parts
Warranty
To Use
Contents
Assembly To Use
TM
Install Infant Car Seat
TM TM TM
TM TM TM
TM TM
2
1
2
1
1 Install Rear Wheels
Press the button in while
sliding the rear wheel axle
into the frame until you hear
a “click” (Figure 1). Repeat
for other rear wheel. Pull
to confirm it is assembled
securely.
3
3 Install Front Wheel
Assembly
Squeeze the front wheel
fork while inserting it into
the frame tube. Push front
wheel fork into frame tube
until you hear a “click”
(Figure 3).
Pull to confirm it
is assembled securely.
2 Attach Shopping
Basket
Slide tab into tube at the
front center (Figure 2).
Secure an adhesive strap
around frame above each
rear wheel (Figure 2a).
2
3
4
4a
4 Unfold Stroller
Unfasten the transport hook
and push the handlebar
upward (Figure 4).
The frame will unfold
itself. The handlebar will
lock into place with a
“click” (Figure 4a).
2a
5 Adjust Handlebar
Height
Squeeze the adjustment
button and slide the
handlebar to desired height
(Figure 5). The handlebar
will click into place.
2
1
5
6 Parking Brake
Always use the parking
brake, even when
standing still for only a few
moments! Push down on
the red pedal (P) behind
the rear wheel to set the
parking brake (Figure 6).
Push the opposite pedal
to release the parking
brake.
2
1
6
NOTE: The Buzz
TM
stroller frame
has a unique mechanism that
enables the automatic unfolding
of the frame. The temperature
can effect the functioning of this
mechanism. In cold or frosty
weather, the stroller may unfold
more slowly than usual (at room
temperature).
1