Philips is dedicated to produce caring, reliable products to give
parents the reassurance they need.Your baby cam consists of a
monitor unit (parent unit) and a camera unit (baby unit).With
the units properly connected the baby cam provides round-the-
clock support by ensuring you can always see and hear your
baby clearly.When the baby cam is used as a regular baby
monitor, it enables you to hear your baby anywhere in the
house at all times.
Philips Baby Care, taking care together
Safety information
Please read this user manual carefully before using your baby
cam and keep it for future reference.This baby cam is intended
as an aid. It is not a substitute for responsible and proper adult
supervision and should not be used as such.
• Read and observe all warnings on the product and in this
user manual.
• Make sure the camera unit and adapter cable are always out
of reach of the baby (at least 1 meter/3 feet away).
• Never cover the baby cam (with a towel, blanket, etc.).
• Never use the baby cam in moist places or close to water.
• Do not expose the baby cam to extreme cold, heat or light
(e.g. direct sunlight).
• Check to ensure that the voltage indicated on the type plate
of the adapters (A-12, B-10) corresponds to the local power
voltage before connecting to the AC power supply.
• To prevent electric shock, do not open the inside of the
camera unit and monitor unit (except for the battery
compartments)
• The monitor unit antenna (B-9) is fixed; do not try to extend
or bend it.
• The camera unit antenna (A-3) can only be bent down (and
up again). It cannot be extended.
• Always unplug the AC adapters when not using the baby cam
for long periods of time.
• The adapters and battery compartment covers may be slightly
warm during operation.This is normal.
• Position the AC adapter cords so that they are not walked on
or pinched by items placed upon or against them, paying
particular attention to cords at AC adapter plugs, wall plugs,
and the point at which the cords attach to the system.
EN
Welcome
6