Filter
Top Products
Menu options
Most functions can be operated on both the baby unit and the parent unit, but there are some
functions that can only be set via the menu options available on the parent unit.
Menu operation - general explanation
1 Press the MENU button to open the menu. (Fig. 32)
The rst menu option appears on the display.
2 Use the – and + buttons to select the desired menu option. (Fig. 33)
3 Press the OK button to conrm your selection. (Fig. 34)
J appears on the display.
4 Press the MENU button again to exit the menu. (Fig. 32)
Note: Always press the MENU button, the – and + buttons and the OK button briey.
1 Select K or L by pressing the – and + buttons and conrm by
pressing the OK button
Playing lullabies
To play or stop a lullaby:
1 Select åK by pressing the – and + buttons and conrm by pressing the OK button.
2 Select : to play the last played lullaby again or ( <| to stop playing
and conrm by pressing the OK button.
To select a different lullaby:
1 Select åK by pressing the – and + buttons and conrm by pressing the OK button.
2 Select ~ by pressing the – and + buttons and conrm by pressing the OK
button.
3 Select the desired lullaby by pressing the – and + buttons and conrm by pressing the OK
button.
You can set the microphone sensitivity of the baby unit to the desired level. When the microphone
sensitivity is set to maximum level, the baby unit picks up every sound, even the baby’s breathing. You
can only change the microphone sensitivity when a connection between the baby unit and the
parent unit has been established, i.e. when the LINK lights on the baby unit and the parent unit
burn green continuously.
1 Select ZR by pressing the – and + buttons and conrm by pressing the OK
button.
2 Select the desired microphone sensitivity level for the baby unit by pressing the – and +
buttons and conrm by pressing the OK button.
Sensitivity
∆ = minimum sensitivity level
Sensitivity ∆ ∆ ∆ ∆ ∆ = maximum sensitivity level
Note: When the microphone sensitivity of the baby unit is set to a high level, it picks up more sounds and
therefore transmits more often. As a result, the unit consumes more power.
,
,
,
,
ENGLISH12