Filter
Top Products
ENGLISH 13
3 Press the OK button (25) to confirm your selection.
4 Use the buttons (18) to make adjustments and selections and press
the OK button (25) to confirm.
> In some cases ‘Saved’ appears on the display to confirm that an
adjustment has boon stored.
5 Press the MENU button (20) again to exit the menu.
Menu options
The options ‘Nightlight’ and ‘Lullaby’ can be operated via the keys on the
sets as well as via the menu.The other options can only be operated via the
menu.
Nightlight
Confirm ‘Light On?’ or ‘Light Off?’ to switch the nightlights on or off.
Lullaby
Confirm ‘Play?’ to replay the last played lullaby or ‘Stop Lullaby?’ to stop
playback.
Sensitivity
Select the desired sensitivity level for the Baby Unit microphone:
‘Sensitivity 9‘ = minimum level / lowest sensitivity;
‘Sensitivity 99999‘ = maximum level (continuous transmission) /
highest sensitivity.
When set to maximum level (continuous transmission), the Baby Unit
monitors continuously and all sounds, regardless of level, can be heard on
the Parent Unit. Battery operating time may decrease to approximately
12 hours during continuous transmission.
You can only change the Baby Unit microphone sensitivity if the connection
between the Baby Unit and Parent Unit is established.
Sound Alert
Confirm ‘Alert On?’ or ‘Alert ‘Off’. If Sound Alert is switched on, the Parent
Unit beeps as soon as the second sound-level-light (25) lights red while the
volume is switched off.
Temperature
Set a minimum and a maximum room temperature (‘Range’) which you
think are convenient for your baby. Minimum temperature can be set
between 10 °C and 19 °C; maximum temperature can be set between
22 °C and 30 °C. If the actual room temperature exceeds the set minimum
or maximum temperature, the ‘Low’ or ‘High’ indication appears on the
display and the actual temperature starts blinking. If the room temperature
drops below 7 °C or rises above 33 °C,‘– –’ starts blinking on the display.
+
–
+
SC479_book.qxd 06-07-2004 09:55 Pagina 13