Filter
Top Products
2
GB
2. Detailed parts guide
Manual Breast Pump
a) Funnel cover
b) Let-down Massage Cushion
c) Pump cover
d) Silicone diaphragm
and stem*
e) Handle
f) Pump body
g) White valve*
3. Cleaning and sterilisation
Before you use your breast pump for the first time and every time
before use:
Separate all parts, then wash in the dishwasher or in warm soapy
water and rinse. Do not use antibacterial or abrasive cleaners/detergents.
Sterilise in a Philips AVENT Steam Steriliser (Digital, Electric or Microwave),
or by boiling for 5 minutes. If using a Philips AVENT
Steam Steriliser, the pump will remain sterile in the
steriliser for a minimum of 6 hours, provided
the lid is not removed.
4
. Keeping your breast pump sterile
for travel
After sterilising all parts, insert the white valve (g)
and fit the diaphragm with stem (d) onto the pump
body (f). Clip the cover (a) over the funnel and
Let-down Massage Cushion (b) and screw on the
sealing base (n) in place of the VIA Cup and Adaptor.
VIA Feeding System
h) VIA Adaptor
i) VIA Cup (180ml/6oz)
j) VIA Lid/Stand
k) Dome cap
l) Extra Soft Teat, Newborn Flow (0m+)
m) Screw ring
n) Sealing base
*spares included