Filter
Top Products
Configuring the Monitor Using a PC
42 Chapter 4 Configuring the Monitor
To select an option:
1. Using the appropriate keys, move the cursor to the selection you require.
2. Press
Enter.
To write the options to the monitor and return to the Main Menu:
1. Move the cursor to
Write Options.
2. Press Enter.
A confirmation message asks if the selected options are correct.
The following shows the resetting screen that is displayed when you need to reset the serial
number:
Contact your Philips Medical Response Center for your access code. Make sure you have
the serial number of the original CPU board available.
Series 50 Fetal Monitor Configuration and Service Software Rev A.nn.nn
Select Options according to the labels on the monitor
MESSAGE:
Select with >cursor keys< or >E, S, D, X< then press <ENTER> to execute!!
Option: Actual Setting is: Selection:
#C.01 TWIN: OFF OFF ON
#C.02 FMP: OFF OFF ON
Write Options
Series 50 Fetal Monitor Configuration and Service Software Rev A.nn.nn
MESSAGE:
NOTE: resetting the Serial Number is protected by Access Code
Serial Number : 3151G00026
Type in 4 digit code from factory TME and press <ENTER>
>----<