Filter
Top Products
Fitting the Paper Take-Up Tray
Chapter 3 Installing the Monitor 23
Fitting the Paper Take-Up Tray
To fit the paper take-up tray to the monitor:
1. Slide the tray between the guides (A) until the pins locate in the holes (B).
2. Pull the tray forward to lock it in place.
Figure 3-4 Fitting the Paper Take-Up Tray to the Monitor
To fit the paper take-up tray (Option 1AB) to the mounting plate:
1. Holding the tray at a slight angle, put the top edge in the slot on the plate.
2. Swing the tray down into place.
Figure 3-5 Fitting the Paper Take-Up Tray to the Wall Mount
Cart-mounted
Paper Tray
Attach the paper tray before installing the monitor on the angle mount. Slide the paper tray
into position so that the small hole in the attaching edge at the rear of the paper tray hooks
over the mounting projection in the angle mount itself. This secures the paper tray to the
angle mount.