Filter
Top Products
21MENU SETTINGS
Activate count up timer
The timer can count up from 1 second to 99 hours 59
minutes.
The TIMER icon [
] is displayed along with the countup
time.
1. In the Timer setting menu, Press [ ].
2. Use [ ] or [ ] key to select "Count up". Press [ ].
3. "Timer On?" is shown on the display, Press [ ] to
confi rm.
Start, Stop and Reset the count up timer
Parent Unit
When count up is activated,
1. When it stops and displays 00:00:00, press [ ] to start,
it will count from 00:00:00;
2. When it is counting, press [ ] to stop. Counted time is
displayed steadily;
3. When it stops and displays a counted time, press
[ ] to reset it to 00:00:00;
4. Press [ ] again to restart it.
Cancel count up timer
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
2. Use [ ] or [ ] key to select "Count up". Press [ ].
3. "Timer Off?" is shown on the display, press [
] to
confi rm.
If countdown is currently running, the count up timer will not
be available, and vice versa. Only one of the timers can be
used at one time.
Set clock
This sets the clock on both units.
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
2. Use [ ] or [ ] key to select "Clock" and press [ ].
3. "Set Time" is shown on the display. Press [ ].
4. Press [ ] or [ ] to set the time then press [ ] to
confi rm.
5. If you set the time format to 12 hour, you should set the
AM or FM. Press [ ] or [ ] to set AM/PM for 12 hours
then press [ ].
Set 12 or 24 hour Format
Time format menu is available only after Clock is activated.
1. Press [Menu] and use [ ] or [ ] key to select "Timer".
Press [ ].
2. Use [ ] or [ ] key to select "Clock" and press [ ].
3. Use [ ] or [ ] key to select "Format" and press [ ].
4. Press [ ] or [ ] to select 12 or 24 hours and press [ ].